Configuring Rip; Enabling Rip; Adjusting Rip Timer; Configuring Rip Neighbor - Zte ZXR10 5900E Series User Manual

St- Command
ep
1
ZXR10#ZXR10(config)#
2
ZXR10(config-router)#
sk>
Command
ZXR10(config-router)#
olddown><flush>
Command
ZXR10(config-router)#
St- Command
ep
1
ZXR10(config-if-vlanX)#
<key>
2
ZXR10(config-if-vlanX)#
{text|md5}

Configuring RIP

Enabling RIP

router rip
network <ip-address><net-ma

Adjusting RIP Timer

timers basic <update><invalid><h

Configuring RIP Neighbor

neighbor <ip-address>

Configuring RIP Authentication

To specify the type of authentication used in RIP Version 2 packets,
designate the key for interface simple text authentication, use the
following command.
ip rip authentication key
ip rip authentication mode
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 RIP Configuration
Function
This enables RIP.
This associates a network
with RIP routing process.
Function
This adjusts timer for better RIP
performance.
Function
This configures neighbor router
which exchanges routing
information with this router.
Function
This designates the key
for interface simple text
authentication.
This designates the
authentication type for
RIP packet.
9