Syslog Configuration Example; Figure 3-4 Syslog Configuration Example Topology - Zte ZXR10 5900E Series Configuration Manual

Chapter 3 Network Management

3.4.4 SYSLOG Configuration Example

Configuration Description
The function of SYSLOG is that alarm information is sent to SYSLOG server by specified
format. As shown in Figure 3-4, configure SYSLOG function on the device and then send
alarm to SYSLOG server by SYSLOG protocol.

Figure 3-4 SYSLOG Configuration Example Topology

Configuration Thought
1. Connect SYSLOG server with switch.
2. Configure SYSLOG server alarm level.
3. Configure SYSLOG type.
4. Specify SYSLOG server address.
Configuration Commands
The configuration of switch is as follows:
ZXR10(config)#syslog level WARNINGS
/*Configure alarm level of SYSLOG as WARNINGS*/
ZXR10(config)#syslog-server facility syslog
/*Configure type of SYSLOG as SYSLOG*/
ZXR10(config)#syslog-server host 1.1.1.1
/*Configure IP address of SYSLOG server*/
Configuration Verification
After configuration, use the show command to check configuration.
ZXR10(config)#show running-config | include syslog
syslog level WARNINGS
syslog-server host 1.1.1.1 fport 514 lport 514 alarmlog cmdlog debugmsg
syslog-server facility syslog
3-35
SJ-20150114102049-002|2015-01-15 (R1.0) ZTE Proprietary and Confidential