Configuring Rmon; Rmon Configuration Example - Zte ZXR10 8900 Series User Manual

Step Command
1
ZXR10(config-if)#
<index>[owner <string>]
2
ZXR10(config-if)#
><interval>{delta|absolute} rising-threshold
<value>[<event-index>] falling-threshold
<value>[<event-index>][owner <string>]
3
ZXR10(config-if)#
wner <string>][buckets <bucket-number>][interval
<seconds>]
4
ZXR10(config-if)#
<community>][description <string>][owner
<string>]
5
ZXR10(config-if)#
istory][statistics]
Example
Example

Configuring RMON

To configure RMON, perform the following steps.
rmon collection statistics
rmon alarm <index><variable
rmon collection history <index>[o
rmon event <index>[log][trap
show rmon [alarms][events][h

RMON Configuration Example

The following are several configuration examples of the RMON.
This example shows how to configure and start statistics control
entries of the RMON.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#rmon collection statistics 1 owner rmontest
Assume n computers are linked to port fei_1/1 and when these
computers communicate on the sub-network, traffic statistics can
be viewed through NMS software and it can also be viewed with
show command.
ZXR10#show rmon statistics
EtherStatsEntry 1 is active, and owned by rmontest
Monitors ifEntry.1.1 which has
Received 60739740 octets, 201157 packets,
1721 broadcast and 9185 multicast packets,
0 undersized and 0 oversized packets,
0 fragments and 0 jabbers,
0 CRC alignment errors and 32 collisions.
# of dropped packet events (due to lack of resources): 511
# of packets received of length (in octets):
64: 92955, 65-127: 14204, 128-255: 1116,
256-511: 4479, 512-1023: 85856, 1024-1518:2547
This example describes how to configure and enable RMON history
control entry.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#rmon collection history 1 bucket 10
interval 10 owner rmontest
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 13 Network Management Configuration
Function
This enables statistics on a
port
This sets alarms and MIB
objects
This enables history collection
of the interface
This configures an event
This displays RMON
configuration and related
information
135