Eps Control Unit Construction; Eps Control Unit Removal And Installation - Suzuki kq750 Service Manual

EPS Control Unit Construction (LT-A750XP/ZK9)
1. EPS control unit
2. EPS control unit plate
3. Cushion
EPS Control Unit Removal and Installation (LT-
A750XP/ZK9)
Removal
1) Disconnect the battery (–) lead wire. Refer to
"Battery Removal and Installation (LT-A750XP/ZK9)
in Section 1J (Page 1J-2)".
2) Remove the front fender. Refer to "Front Side
Exterior Parts Removal and Installation in Section
9D in related manual".
3) Disconnect the EPS control unit couplers.
Repair Instructions
3
(a)
4. Torque sensor coupler
: 12 N˜m (1.2 kgf-m, 8.5 lbf-ft)
"B": Install the clip of the torque sensor coupler to the hole "A" of the
EPS control unit plate.
B931G46306002
Power Assisted Steering System:
3
1
6C-48
B931G46306001
4
"B"
"A"
2
I931H1630056-02
I931G3630041-01