Fuel Pump Disassembly And Assembly; Fuel Mesh Filter Inspection And Cleaning; Fuel Injector Inspection And Cleaning; Fuel Injector / Fuel Delivery Pipe Removal And Installation - Suzuki kq750 Service Manual

Fuel Pump Disassembly and Assembly

Refer to "Fuel Pump Assembly Removal and Installation
(Page 1G-9)".
Disassembly
Remove the fuel cup holder (1) with a (–) screw driver.
Assembly
Assemble the fuel tank pump in the reverse order of the
disassembly.

Fuel Mesh Filter Inspection and Cleaning

Inspect the fuel mesh filter in the following procedures:
1) Remove the fuel cup holder. Refer to "Fuel Pump
Disassembly and Assembly (Page 1G-10)".
2) If the fuel mesh filter is clogged with foreign particles,
it hinders smooth gasoline flow resulting in loss of
engine power. Such a filter should be cleaned by
blowing with compressed air.
NOTE
When the fuel mesh filter is dirtied
excessively, replace the fuel mesh filter with
a new one.
3) After finishing the fuel mesh filter inspection, reinstall
the fuel cup holder and fuel pump assembly. Refer to
"Fuel Pump Assembly Removal and Installation
(Page 1G-9)".

Fuel Injector Inspection and Cleaning

B831G21706012
Inspect the fuel injector in the following procedures:
1) Remove the fuel injector. Refer to "Fuel Injector /
2) Check the fuel injector filter for evidence of dirt and
1
I831G1170020-01
3) Install the fuel injector. Refer to "Fuel Injector / Fuel
B831G21706013
Fuel Injector / Fuel Delivery Pipe Removal and
Installation
Removal
1) Remove the front fender. Refer to "Front Side
2) Remove the air cleaner box. Refer to "Air Cleaner
3) Place a rug under the fuel feed hose (1) and
I831G1170021-01
Fuel Delivery Pipe Removal and Installation
(Page 1G-10)".
contamination. If present, clean and check for
presence of dirt in the fuel lines and fuel tank.
Delivery Pipe Removal and Installation (Page 1G-
10)".
WARNING
!
• Spilled gasoline should be wiped off
immediately.
• Keep away from fire or spark.
• Work in a well-ventilated area.
Exterior Parts Removal and Installation in Section
9D (Page 9D-6)".
Box Removal and Installation in Section 1D
(Page 1D-5)".
disconnect the fuel feed hose (1) from the fuel
delivery pipe.
Fuel System: 1G-10
B831G21706014
I831G1170022-01
B831G21706015