Rear Propeller Shaft Components; Rear Propeller Shaft Removal And Installation - Suzuki kq750 Service Manual

Rear Propeller Shaft Components

1. O-ring
2. Rear propeller shaft joint
3. Rear propeller shaft boot
4. Rear propeller shaft spring
5. Rear propeller shaft
6. O-ring
7. Rear propeller shaft boot
8. Rear propeller shaft yoke

Rear Propeller Shaft Removal and Installation

Refer to "Rear Propeller Shaft Components (Page 3D-
17)".
Refer to "Final Gear Construction in Section 3B
(Page 3B-22)".
Removal
1) Remove the final gear assembly. Refer to "Final
Gear Assembly Removal and Installation in Section
3B (Page 3B-23)".
2) Remove the rear propeller shaft joint (1).
1
5
6
7
B831G23406014
I831G1340059-01
2
3
4
(a)
9
8
(b)
9. Universal joint set
10. Rear output shaft yoke
11. Oil seal
: 100 N⋅m (10.0 kgf-m, 72.5 lb-ft)
: 2 N⋅m (0.2 kgf-m, 1.5 lb-ft)
: Apply water resistance grease.
: Do not reuse.
3) Remove the O-ring (2).
Propeller Shafts:
1
11
10
2
3D-17
B831G23406013
I831G1340057-04
I831G1340060-01