Suzuki kq750 Service Manual page 321

4) Remove the wheel hub bearing (4), using the
hydraulic press and special tool.
Special tool
(B): 09913–70210 (Bearing installer set)
(B)
Installation
Install the wheel hub bearing in the reverse order of
removal. Pay attention to the following points:
• Install the wheel hub bearing (1), using the hydraulic
press and special tool.
CAUTION
!
Never reuse wheel hub bearing (1).
Special tool
(A): 09913–70210 (Bearing installer set)
(A)
4
I831G1220028-02
1
I831G1220029-03
• Install the snap ring (2) with the special tool.
CAUTION
!
Never reuse snap ring (2).
Special tool
: 09900–06108 (Snap ring pliers)
• Install a new inner dust seal (3) using a suitable size
socket wrench.
CAUTION
!
Replace the inner dust seal (3) with a new
one.
• Apply grease to the lip of inner dust seal.
: Grease 99000–25160 (Water resistance
grease)
Front Suspension: 2B-8
2
I831G1220032-02
3
I831G1220030-02