Propeller Shafts
Driveline / Axle
Front Output Shaft Components
1. Front output shaft bearing (Rear)
2. Front output shaft
3. Front output shaft housing
4. Front output shaft bearing (Front)
5. Shim(s)
6. Oil seal
Front Output Shaft Removal and Installation
Removal
1) Remove the engine assembly from the frame. Refer
to "Engine Assembly Removal in Section 1D
(Page 1D-13)".
2) Disassemble the engine top side. Refer to "Engine
Top Side Disassembly in Section 1D (Page 1D-17)".
Repair Instructions
5
3
4
1
B831G23406002
7
6
2
7. Front drive collar assembly
: Apply grease.
: Apply water resistance grease.
: Apply engine oil.
: Do not reuse.
3) Separate the crankcase with the special tool. Refer
to "Engine Bottom Side Disassembly in Section 1D
(Page 1D-45)".
Special tool
(A): 09920–13120 (Crankcase separating
tool)
Propeller Shafts:
3D-1
B831G23406001
I831G1340001-03
(A)
I831G1340002-03