Front Suspension Assembly Construction - Suzuki kq750 Service Manual

Front Suspension Assembly Construction

1. Front shock absorber mounting bolt
2. Front shock absorber mounting nut
3. Front suspension arm pivot nut (Upper)
4. Front suspension arm pivot nut (Lower)
5. Tie-rod end nut
6. Steering knuckle end nut (Upper / Lower)
7. Front wheel hub nut
8. Washer
: The conical side of washer faces outside.
9. Cotter pin
10. Bushing
1
(a)
11
12
4
(c)
5
(d)
11. Inner dust seal
: Align the surface of dust seal with the edge of suspension arm.
12. Outer dust seal
"a": Position of the bushing (7.0 mm (0.28 in) from edge of suspension arm)
: 55 N⋅m (5.5 kgf-m, 40.0 lb-ft)
: 60 N⋅m (6.0 kgf-m, 43.5 lb-ft)
: 65 N⋅m (6.5 kgf-m, 47.0 lb-ft)
: 29 N⋅m (2.9 kgf-m, 21.0 lb-ft)
: 110 N⋅m (11.0 kgf-m, 79.5 lb-ft)
: Apply water resistance grease.
: Do not reuse.
" a " " a "
10
6
(d)
6
(d)
Front Suspension:
B831G22206002
11
3
(b)
12
2
(b)
7
(e)
9
8
I831G1220001-06
2B-2