Suzuki kq750 Service Manual page 103

Step
1 6) Disconnect the ECM coupler. Refer to "ECM Removal
and Installation in Section 1C (Page 1C-1)".
7) Insert the needle pointed probes to the lead wire coupler.
8) Check the continuity between the G/B wire "B" and
terminal "13".
If OK, then check the continuity between the B/Br wire
"C" and terminal "24".
Special tool
(A): 09900–25008 (Multi-circuit tester set)
(B): 09900–25009 (Needle pointed probe set)
Tester knob indication
Continuity test (
ECM coupler (Harness side)
(B)
"13"
"24"
Is the continuity OK?
Action
)
(A)
"B"
"C"
Engine General Information and Diagnosis:
Yes
Go to Step 3.
I831G1110090-03
1A-30
No
G/B wire shorted to
VCC, or B/Br wire open.