Suzuki kq750 Service Manual page 697

6C-51 Power Assisted Steering System:
9) Remove the front brake hose union (7) and throttle
cable (8) from the cable guide (9).
7
10) Remove the steering shaft bolt (10).
10
11) Remove the EPS body assembly mounting nuts and
bolts.
12) Remove the cable guide (11).
8
9
I931G3630053-01
I931G3630054-01
I931G3630055-01
11
I931G3630056-01
13) Remove the EPS body assembly.
CAUTION
!
Never disassemble the EPS body assembly.
Installation
Refer to "Steering / Handlebars Assembly Construction
(LT-A750XP/ZK9) in Section 6B (Page 6B-2)".
Install the EPS body assembly in the reverse order of
removal. Pay attention to the following points:
• Apply grease to the spline of the EPS body assembly.
: Grease 99000–25160 (Water resistance
grease or equivalent)
• When installing the EPS body assembly, align the
marking "A" of the EPS output shaft and slide "B" of
the steering shaft.
"B"
I931G3630057-02
"A"
I931G3630058-02