Service Data
Unit: mm (in)
Item
Starter motor brush length
Starter torque limiter slip torque
Starter relay resistance
Tightening Torque Specifications
Fastening part
Starter motor mounting bolt
Starter motor lead wire mounting nut
Starter clutch bolt
NOTE
The specified tightening torque is also described in the following.
"Starter Motor Components (Page 1I-3)"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Tightening Torque List in Section 0C
(Page 0C-7)".
Recommended Service Material
Material
Grease
Moly paste
Thread lock cement
NOTE
Required service material is also described in the following.
"Starter Motor Components (Page 1I-3)"
"Recoil Starter Components (Page 1I-14)"
Specifications
Standard
Limit
Standard
Special Tools and Equipment
SUZUKI recommended product or Specification
SUZUKI SUPER GREASE A or
equivalent
SUZUKI Moly paste or equivalent
THREAD LOCK CEMENT SUPER
1303 or equivalent
THREAD LOCK CEMENT 1342 or
equivalent
Specification
12.5 (0.49)
6.0 (0.24)
41.2 – 62.8 N⋅m
(4.2 – 6.4 kgf-m, 14.5 – 32.5 lb-ft)
3 – 5 Ω
Tightening torque
N⋅m
kgf-m
10
1.0
6
0.6
26
2.6
P/No.: 99000–25010
P/No.: 99000–25140
P/No.: 99000–32030
P/No.: 99000–32050
Starting System:
B831G21907001
Note
B831G21907002
Note
lb-ft
7.0
(Page 1I-4)
4.5
(Page 1I-4)
19.0
(Page 1I-11)
B831G21908001
Note
(Page 1I-4) /
(Page 1I-5)
/
(Page 1I-16) /
(Page 1I-16)
(Page 1I-5)
(Page 1I-11)
(Page 1I-14)
1I-18