Front Drive (Differential) Gear Oil Level Inspection; Front Drive (Differential) Gear Oil Replacement; Front Drive (Differential) Assembly Removal And Installation - Suzuki kq750 Service Manual

3B-4 Differential:
Front Drive (Differential) Gear Oil Level
Inspection
Refer to "Front Differential Gear Oil Inspection in Section
0B (Page 0B-12)".

Front Drive (Differential) Gear Oil Replacement

Refer to "Front Differential Gear Oil Inspection in Section
0B (Page 0B-12)".
Front Drive (Differential) Assembly Removal
and Installation
Removal
1) Remove the front wheels. Refer to "Front / Rear
Wheel Removal and Installation in Section 2D
(Page 2D-2)".
2) Drain front differential gear oil. Refer to "Front
Differential Gear Oil Inspection in Section 0B
(Page 0B-12)".
3) Remove the inner fender (left and right). Refer to
"Front Side Exterior Parts Removal and Installation
in Section 9D (Page 9D-6)".
4) Remove the drive shaft. Refer to "Front Drive Shaft
Assembly Removal and Installation in Section 3A
(Page 3A-2)".
5) Disconnect the rear brake light switch lead wire.
6) Remove the lead wire clamps.
7) Disconnect the 2WD/4WD/diff-lock actuator lead
wire coupler (1).
B831G23206003
B831G23206004
B831G23206005
8) Remove the front drive (differential) mounting bolts
and nuts.
9) Remove the front shock absorber. Refer to "Front
Shock Absorber Removal and Installation in Section
2B (Page 2B-3)".
10) Move the suspension upper arm upward and remove
the front drive (differential) assembly.
I831G1320003-01
I831G1320004-01
1
I831G1320005-02
I831G1320006-02
I831G1320146-01