Fuel Pump Components; Fuel Pump Assembly Removal And Installation - Suzuki kq750 Service Manual

1G-9 Fuel System:
7) Remove the fuel tank lower cover (4).
4
Installation
Install the fuel tank in the reverse order of removal.

Fuel Pump Components

1. Fuel pump
I831G1170017-01
B831G21706010
2
1
I831G1170004-01
2. Fuel feed hose

Fuel Pump Assembly Removal and Installation

Removal
WARNING
!
• Spilled gasoline should be wiped off
immediately.
• Keep away from fire or spark.
• Work in a well-ventilated area.
1) Remove the fuel tank. Refer to "Fuel Tank Removal
and Installation (Page 1G-8)".
2) Remove the fuel pump retainer (1) with the special
tool.
Special tool
: 09941–51012 (Ring locknut wrench)
3) Remove the fuel pump assembly (2).
Installation
Install the fuel pump assembly in the reverse order of
removal.
Pay attention the following points:
• Align the fuel pump nipple (1) with alignment mark "A"
on the fuel tank.
• Tighten the fuel pump retainer with the special tool to
the specified torque.
Special tool
(A): 09941–51012 (Ring locknut wrench)
Tightening torque
Fuel pump retainer: 35 N·m (3.5 kgf-m, 25.5 lb-ft)
"A"
1
B831G21706011
(A)
1
2
I831G1170018-01
(A)
I831G1170019-01