Ipv6 Mld Snooping Vlan Router-Aging-Time; Ipv6 Mld Snooping Vlan Member-Aging-Time - TP-Link JetStream TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit jetstream l2 managed switch
Hide thumbs
Also See for JetStream TL-SL5428E:
- Reference manual (341 pages) ,
- User manual (307 pages) ,
- Cli reference manual (245 pages)
Table of Contents
Advertisement
ipv6 mld snooping vlan router-aging-time
Description
The ipv6 mld snooping vlan router-aging-time command is used to specify
router port aging time for a specified VLAN. If this time is set to 0, then the
global router port aging time will be used. The default time is 0. To restore the
default timer, please use no ipv6 mld snooping vlan router-aging-time
command.
Syntax
ipv6 mld snooping vlan vlan-id router-aging-time timer
no ipv6 mld snooping vlan vlan-id router-aging-time
Parameter
vlan-id —— The specified IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
timer —— Aging time of the router port in seconds, ranging from 0 to 1000.
Command Mode
Global Configuration Mode
Example
Specify the router port aging time as 100 seconds in VLAN 2:
TL-SL5428E(config)# ipv6 mld snooping vlan 2 router-aging-time 100
ipv6 mld snooping vlan member-aging-time
Description
The ipv6 mld snooping vlan member-aging-time command is used to specify
member port aging time for a specified VLAN. If this time is set to 0, then the
global member port aging time will be used. The default time is 0. To restore the
default timer, please use no ipv6 mld snooping vlan member-aging-time
command.
Syntax
ipv6 mld snooping vlan vlan-id member-aging-time timer
no ipv6 mld snooping vlan vlan-id member-aging-time
Parameter
vlan-id ——The specified IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
timer —— Aging time of the member port in seconds, ranging from 200 to 1000
and 0.
Command Mode
Global Configuration Mode
TL-SL5428E
JetStream L2 Managed Switch CLI Guide
254
Advertisement
Table of Contents
