Chapter 5 Voice Vlan Commands; Voice-Vlan Enable; Voice-Vlan Aging-Time - TP-Link JetStream TL-SL3428 Cli Reference Manual

Chapter 5
Voice VLANs are configured specially for voice data stream. By configuring Voice VLANs and
adding the ports with voice devices attached to voice VLANs, you can perform QoS-related
configuration for voice data, ensuring the transmission priority of voice data stream and voice
quality.

voice-vlan enable

Description
The voice-vlan enable command is used to enable Voice VLAN function. To
disable Voice VLAN function, please use no voice-vlan enable command.
Syntax
voice-vlan enable vlan-id
no voice-vlan enable
Parameter
vlan-id —— VLAN ID, ranging from 2 to 4094.
Command Mode
Global Configuration Mode
Example
Enable the Voice VLAN function for VLAN 2:
TP-LINK(config)# voice-vlan enable 2

voice-vlan aging-time

Description
The voice-vlan aging-time command is used to set the aging time for a voice
VLAN. To restore to the default aging time for the Voice VLAN, please use no
voice-vlan aging-time command.
Syntax
voice-vlan aging-time aging-time
no voice-vlan aging-time
TL-SL3428
Voice VLAN Commands
JetStream L2 Managed Switch CLI Guide
25