Loopback Interface; Show System-Time - TP-Link JetStream TL-SL5428E Cli Reference Manual

loopback interface

Description
The loopback interface command is used to test whether the port is available
or not.
Syntax
loopback interface { fastEthernet port | gigabitEthernet port } { internal |
external }
Parameter
port —— The Fast/Gigabit Ethernet port number.
internal | external —— Loopback Type. There are two options: "internal" and
"external".
Command Mode
User EXEC Mode and Privileged EXEC Mode
Example
Do an internal-type loopback test for Gigabit Ethernet port 25:
TL-SL5428E# loopback interface gigabitEthernet 1/0/25 internal
Do an external-type loopback test for Gigabit Ethernet port 25:
TL-SL5428E# loopback interface gigabitEthernet 1/0/25 external

show system-time

Description
The show system-time command is used to display the current time system
and its source.
Syntax
show system-time
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the time information of the switch:
TL-SL5428E#show system-time
TL-SL5428E JetStream L2 Managed Switch CLI Guide
145