Command Mode - TP-Link JetStream TL-SL5428E Cli Reference Manual

Syntax
show logging flash [level level]
Parameter
level ——Severity level. There are 8 severity levels marked with values 0-7. The
information of levels with priority not lower than the select level will display.
Display all the log information in the log file by default.

Command Mode

Privileged EXEC Mode and Any Configuration Mode
Example
Display the log information with the level marked 0–3 in the log file:
TL-SL5428E(config)#show logging flash level 3
TL-SL5428E JetStream L2 Managed Switch CLI Guide
116