Syntax
protocol-vlan
no protocol-vlan
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Enable the Protocol-based VLAN feature for the Gigabit Ethernet port 25:
TL-SL5428E(config)#interface gigabitEthernet 1/0/25
TL-SL5428E(config-if)#protocol-vlan
show protocol-vlan template
Description
The show protocol-vlan template command is used to display the information
of the Protocol-based VLAN templates.
Syntax
show protocol-vlan template
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of the Protocol-based VLAN templates:
TL-SL5428E(config)#show protocol-vlan template
show protocol-vlan vlan
Description
The show protocol-vlan vlan command is used to display the information
about Protocol-based VLAN entry.
TL-SL5428E
JetStream L2 Managed Switch CLI Guide
38
Need help?
Do you have a question about the JetStream TL-SL5428E and is the answer not in the manual?