Ipv6 Address Link-Local - TP-Link JetStream TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit jetstream l2 managed switch
Hide thumbs
Also See for JetStream TL-SL5428E:
- Reference manual (341 pages) ,
- User manual (307 pages) ,
- Cli reference manual (224 pages)
Table of Contents
Advertisement
configured ipv6 link-local address will be deleted when the autoconfigured ipv6
link-local address takes effect.
Syntax
ipv6 address autoconfig
Configuration Mode
Interface Configuration Mode (interface vlan)
Example
Enable the automatic configuration of the ipv6 link-local address when the
management VLAN of the switch is VLAN1:
TL-SL5428E(config)# interface vlan 1
TL-SL5428E(config-if)# ipv6 address autoconfig
ipv6 address link-local
Description
The ipv6 address link-local command is used to configure the system ipv6
link-local address manually. To delete the configured link-local address, please
use no ipv6 address link-local command.
Syntax
ipv6 address ipv6-addr link-local
no ipv6 address ipv6-addr link-local
Parameter
ipv6-addr —— The link-local address of the switch. It should be a standardized
IPv6 address with the prefix fe80::/10, otherwise this command will be invalid.
Configuration Mode
Interface Configuration Mode (Interface vlan)
Example
Configure the link-local address as fe80::1234 when the management VLAN of
the switch is VLAN1:
TL-SL5428E(config)# interface vlan 1
TL-SL5428E(config-if)# ipv6 address fe80::1234 link-local
TL-SL5428E
JetStream L2 Managed Switch CLI Guide
150
Advertisement
Table of Contents
Need help?
Do you have a question about the JetStream TL-SL5428E and is the answer not in the manual?