Cluster Manage; Cluster Member - TP-Link JetStream TL-SL5428E Cli Reference Manual

Command Mode
Global Configuration Mode
Example
Configure the newly created cluster name as tp:
TL-SL5428E(config)#cluster commander tp

cluster manage

Description
The cluster manage command is used to configure the hold time and interval to
send handshake packets of the cluster. To return to the default configuration,
please use no cluster manage command.
Syntax
cluster manage [ holdtime hold-time | timer interval-time ]
no cluster manage [ holdtime | timer ]
Parameter
hold-time —— Hold Time, which is the time for the switch to keep the cluster
information. Hold Time ranges from 1 to 255 in seconds. It is 20 by default.
interval-time — — Interval Time, which is the interval to send handshake
packets. Interval Time ranges from 1 to 255 in seconds. It is 20 by default.
Command Mode
Global Configuration Mode
Example
Specify the Hold Time and Interval Time of the cluster as 50 seconds:
TL-SL5428E(config)#cluster manage holdtime 50
TL-SL5428E(config)#cluster manage timer 50

cluster member

Description
The cluster member command is used to add member switch. To delete the
corresponding member, please use no cluster member command. The
add/delete operations of member switches should be implemented by the
commander switch according to the MAC address.
TL-SL5428E JetStream L2 Managed Switch CLI Guide
300