Show Ethernet-Oam Configuration; Show Ethernet-Oam Event-Log - TP-Link JetStream TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit jetstream l2 managed switch
Hide thumbs
Also See for JetStream TL-SL5428E:
- Reference manual (341 pages) ,
- User manual (307 pages) ,
- Cli reference manual (224 pages)
Table of Contents
Advertisement
show ethernet-oam configuration
Description
The show ethernet-oam configuration command is used to display Ethernet
OAM configuration information.
Syntax
show
gigabitEthernet } port ]
Parameter
port —— The Fast/Gigabit Ethernet port number. By default, the Ethernet OAM
configuration information of all ports is displayed.
Command
Privileged EXEC Mode and Any Configuration Mode
Example
Display Ethernet OAM configuration information of Fast Ethernet port 2:
TL-SL5428E(config)#
fastEthernet 1/0/2
show ethernet-oam event-log
Description
The show ethernet-oam event-log command is used to display the Ethernet
OAM event log.
Syntax
show ethernet-oam event-log [ interface { fastEthernet | gigabitEthernet }
port ]
Parameter
port —— The Fast/Gigabit Ethernet port number. By default, the Ethernet OAM
event logs of all ports are displayed.
TL-SL5428E
ethernet-oam
configuration
Mode
show
JetStream L2 Managed Switch CLI Guide
[
interface
ethernet-oam
226
{
fastEthernet
configuration
interface
|
Advertisement
Table of Contents
Need help?
Do you have a question about the JetStream TL-SL5428E and is the answer not in the manual?