1.2 Cli Command Modes - TP-Link JetStream TL-SL5428E Cli Reference Manual

1.2 CLI Command Modes

The CLI is divided into different command modes: User EXEC Mode, Privileged EXEC Mode,
Global Configuration Mode, Interface Configuration Mode and VLAN Database (VLAN
Configuration Mode). Interface Configuration Mode can also be divided into Interface fastEthernet,
Interface gigabitEthernet, Interface link-aggregation and some other modes, which is shown as the
following diagram.
The following table gives detailed information about the Accessing path, Prompt of each mode and
how to exit the current mode and access the next mode.
Mode Accessing Path
Primary mode once it is
User EXEC
connected
Mode
switch.
Use
Privileged command to enter this
EXEC Mode mode from User EXEC
mode.
TL-SL5428E
Figure 1-24 Log on the Switch
with the
TL-SL5428E>
the enable
TL-SL5428E #
JetStream L2 Managed Switch CLI Guide
Prompt Logout or Access the next mode
Use the exit command to disconnect the
switch
connected through the Console port).
Use the enable command to access
Privileged EXEC mode.
Enter the disable or the exit command to
return to User EXEC mode.
Enter configure command to access
Global Configuration mode.
18
(except that the switch is