Rmon History - TP-Link JetStream TL-SL5428E Cli Reference Manual

Note:
The snmp-server traps vlan command without any parameter is used to
enable the both traps. And the no snmp-server traps vlan command without
any parameter is used to disable the the both traps.
Syntax
snmp-server traps vlan [ create | delete ]
no snmp-server traps vlan [create | delete ]
Parameter
create —— Enable VLAN-created trap. It is sent when new VLAN is created
successfully.
delete —— Enable VLAN-deleted traps. It is sent when VLAN is deleted
successfully.
Command Mode
Global Configuration Mode
Example
Enable all SNMP extended VLAN-related traps for the switch：
TL-SL5428E(config)# snmp-server traps vlan
Enable VLAN-created trap only for the switch:
TL-SL5428E(config)# snmp-server traps vlan create

rmon history

Description
The rmon history command is used to configure the history sample entry. To
return to the default configuration, please use no rmon history command.
RMON (Remote Monitoring), basing on SNMP architecture, functions to monitor
the network. History Group is one of the commonly used RMON Groups. After a
history group is configured, the switch collects network statistics information
periodically, based on which the management station can monitor network
effectively.
Syntax
rmon history index interface { fastEthernet port | gigabitEthernet port }
[ interval seconds ] [ owner owner-name ]
no rmon history index
TL-SL5428E JetStream L2 Managed Switch CLI Guide
279