Name; Revision - TP-Link JetStream TL-SL5428E Cli Reference Manual

Example
Map the VLANs 1-100 to Instance 1:
TL-SL5428E(config)#spanning-tree mst configuration
TL-SL5428E(config-mst)#instance 1 vlan 1-100
Disable Instance 1, namely remove all the mapping VLANs 1-100:
TL-SL5428E(config)#spanning-tree mst configuration
TL-SL5428E(config-mst)#no instance 1
Remove VLANs 1-50 in mapping VLANs 1-100 for Instance 1:
TL-SL5428E(config)#spanning-tree mst configuration
TL-SL5428E(config-mst)#no instance 1 vlan 1-50

name

Description
The name command is used to configure the region name of MST instance.
Syntax
name name
Parameters
name —— The region name, used to identify MST region. It ranges from 1 to
32 characters.
Command Mode
MST Configuration Mode
Example
Configure the region name of MST as "region1":
TL-SL5428E(config)#spanning-tree mst configuration
TL-SL5428E(config-mst)#name region1

revision

Description
The revision command is used to configure the revision level of MST instance.
Syntax
revision revision
TL-SL5428E JetStream L2 Managed Switch CLI Guide
204