S-Condition - TP-Link JetStream TL-SL5428E Cli Reference Manual

Parameter
vlan-id — — The VLAN ID of Redirect. The data packets matching the
corresponding ACL will be forwarded in the specific VLAN. The VLAN ID ranges
from 1 to 4094.
Command Mode
Action Configuration Mode
Example
Edit the actions for policy1. Forward the data packets matching ACL 120 in the
policy to Fast Ethernet VLAN 1:
TL-SL5428E(config)#access-list policy action policy1 120
TL-SL5428E(config-action)#redirect vlan 1

s-condition

Description
The s-condition command is used to configure Stream Condition function of
policy action.
Syntax
s-condition rate rate osd {none | discard}
Parameter
rate —— The rate of Stream Condition, ranging from 0 to 100000kbps.
osd —— Out of Band disposal of Stream Condition. It is the disposal way of the
data packets those are transmitted beyond the rate. There are two options,
"none" and "discard". By default, the option is "none".
Command Mode
Action Configuration Mode
Example
Edit the actions for policy1. For the data packets matching ACL 120 in the policy,
if the rate beyond 1000kbps, they will be discarded by the switch:
TL-SL5428E(config)#access-list policy action policy1 120
TL-SL5428E(config-action)#s-condition rate 1000 osd discard
TL-SL5428E JetStream L2 Managed Switch CLI Guide
194