S-Mirror; Qos-Remark - TP-Link JetStream TL-SL5428E Cli Reference Manual

s-mirror

Description
The s-mirror command is used to configure Stream Mirror function of policy
action to the specified port.
Syntax
s-mirror interface { fastEthernet port | gigabitEthernet port }
Parameter
port —— The Mirror Port number of Stream Mirror.
Command Mode
Action Configuration Mode
Example
Edit the actions for policy1. Specify the mirror port as Fast Ethernet port 2 for the
data packets matching ACL 120:
TL-SL5428E(config)#access-list policy action policy1 120
TL-SL5428E(config-action)#s-mirror interface fastEthernet 1/0/2

qos-remark

Description
The qos-remark command is used to configure QoS Remark function of policy
action.
Syntax
qos-remark dscp dscp priority pri
no qos-remark
Parameter
dscp —— DSCP of QoS Remark. Specify the DSCP region for the data
packets matching the corresponding ACL. DSCP ranges from 0 to 63. By default,
it is not limited.
pri —— Local Priority of QoS Remark. Specify the local priority for the data
packets matching the corresponding ACL. Local Priority ranges from 0 to 3.
Command Mode
Action Configuration Mode
TL-SL5428E JetStream L2 Managed Switch CLI Guide
195