Loopback-Detection Recover; Show Loopback-Detection Global - TP-Link JetStream TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit jetstream l2 managed switch
Hide thumbs
Also See for JetStream TL-SL5428E:
- Reference manual (341 pages) ,
- User manual (307 pages) ,
- Cli reference manual (245 pages)
Table of Contents
Advertisement
loopback-detection recover
Description
The loopback-detection recover command is used to remove the block status
of selected ports, recovering the blocked ports to normal status,
Syntax
loopback-detection recover
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Recover the blocked Gigabit Ethernet port 25 to normal status:
TL-SL5428E(config)#interface gigabitEthernet 1/0/25
TL-SL5428E(config-if)#loopback-detection recover
show loopback-detection global
Description
The show loopback-detection global command is used to display the global
configuration of loopback detection function such as loopback detection global
status, loopback detection interval and loopback detection recovery time.
Syntax
show loopback-detection global
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of loopback detection function:
TL-SL5428E#show loopback-detection global
TL-SL5428E
JetStream L2 Managed Switch CLI Guide
182
Advertisement
Table of Contents
