Ip Igmp Snooping Filter Maxgroup; Ip Igmp Snooping Filter Mode - TP-Link JetStream TL-SL5428E Cli Reference Manual

Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Enable IGMP Snooping filter function for Gigabit Ethernet port 26:
TL-SL5428E(config)#interface gigabitEthernet 1/0/26
TL-SL5428E(config-if)#ip igmp snooping filter

ip igmp snooping filter maxgroup

Description
The ip igmp snooping filter maxgroup command is used to specify the
maximum number of multicast groups for a port to join in.
Syntax
ip igmp snooping filter maxgroup maxgroup
Parameter
maxgroup —— The maximum number of multicast groups for a port to join in. It
is used to prevent some ports taking up too much bandwidth.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Specify the maximum number of multicast groups for Fast Ethernet ports 2-5 to
join in as 10:
TL-SL5428E(config)#interface range fastEthernet 1/0/2-5
TL-SL5428E(config-if-range)#ip igmp snooping filter maxgroup 10

ip igmp snooping filter mode

Description
The ip igmp snooping filter mode command is used to configure the Action
mode for the desired port.
Syntax
ip igmp snooping filter mode mode
TL-SL5428E JetStream L2 Managed Switch CLI Guide
240