Dldp(Interface); Dldp Reset(Interface) - TP-Link JetStream TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit jetstream l2 managed switch
Hide thumbs
Also See for JetStream TL-SL5428E:
- Reference manual (341 pages) ,
- User manual (307 pages) ,
- Cli reference manual (245 pages)
Table of Contents
Advertisement
Example
Reset the DLDP function globally:
TL-SL5428E(config)# dldp reset
dldp(interface)
Description
The dldp command is used to enable the DLDP function of the specified port. To
disable it, please use no dldp command.
Syntax
dldp
no dldp
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Enable the DLDP function of ports 2-4:
TL-SL5428E (config)# interface range fastEthernet 1/0/2-4
TL-SL5428E (config-if-range)# dldp
dldp reset(interface)
Description
The dldp reset command is used to reset the specified port and restart the link
detect process.
Syntax
dldp reset
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Reset the DLDP function of ports 2-4:
TL-SL5428E
JetStream L2 Managed Switch CLI Guide
231
Advertisement
Table of Contents
