Ip Dos-Prevent Syn-Rate - TP-Link JetStream TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit jetstream l2 managed switch
Hide thumbs
Also See for JetStream TL-SL5428E:
- Reference manual (341 pages) ,
- User manual (307 pages) ,
- Cli reference manual (245 pages)
Table of Contents
Advertisement
Parameter
ping-rate —— Specify the transmission rate of the Ping packets when the
Defend Type Ping Flooding is enabled. The options are 128k、 256k、 512k、 1m、
2m、4m in bps. By default, the value is 128k.
Command Mode
Global Configuration Mode
Example
Specify the transmission rate of the Ping packets as 256k:
TL-SL5428E(config)#ip dos-prevent ping-rate 256k
ip dos-prevent syn-rate
Description
The ip dos-prevent syn-rate command is used to configure the transmission
rate of the SYN/SYN-ACK packets. To restore to default, please use no ip
dos-prevent syn-rate command.
Syntax
ip dos-prevent syn-rate syn-rate
no ip dos-prevent syn-rate
Parameter
syn-rate —— Specify the transmission rate of the SYN/SYN-ACK packets when
the Defend Type SYN/SYN-ACK Flooding is enabled. The options are 128k、
256k、512k、1m、2m、4m in bps. By default, the value is 128k.
Command Mode
Global Configuration Mode
Example
Specify the transmission rate of the SYN/SYN-ACK packets as 1m:
TL-SL5428E(config)#ip dos-prevent syn-rate 1m
TL-SL5428E
JetStream L2 Managed Switch CLI Guide
92
Advertisement
Table of Contents
