Ip Igmp Snooping Querier Vlan (Specific Query) - TP-Link JetStream TL-SL5428E Cli Reference Manual

ip igmp snooping querier vlan (specific query)

Description
The ip igmp snooping querier vlan command is used to configure the
parameters for IGMP Snooping Querier to send a specific query frame. To
return to the default configuration, please use no ip igmp snooping querier
vlan command.
Syntax
ip igmp snooping querier vlan vlan-list {last-member-query-interval interval
| last-member-query-count count | special-query source-ip ip-addr }
no ip igmp snooping querier vlan vlan-list {last-member-query-interval |
last-member-query-count | special-query source-ip}
Parameter
vlan-list—— VLAN ID list, ranging from 1 to 4094, in the format of 1-3, 5. It is
multi-optional.
interval — — The time interval of sending specific query frames by IGMP
Snooping Querier, ranging from 1 to 5 (Seconds). By default, it is 1. A specific
query will be sent on condition that "immediate-leave" is not enabled and a
leave frame is received.
count—— The times of sending specific query frames by IGMP Snooping
Querier, ranging from 1 to 5. By default, it is 2. The switch will still treat the port
as group member until the specific frames number sent by the querier reaches
"last-member-query-count" and no report frame is received from the port.
ip-addr—— The source IP of the specific query frame sent by IGMP Snooping
Querier. It should not be a multicast IP or a broadcast IP. By default, it is
192.168.0.1.
Command Mode
Global Configuration Mode
Example
For VLAN 2, specify its last-member-query-interval as 2:
TL-SL5428E(config)#ip
last-member-query-interval 2
TL-SL5428E JetStream L2 Managed Switch CLI Guide
igmp snooping
243
querier vlan 2