Cluster Ip Pool; Cluster Commander - TP-Link JetStream TL-SL5428E Cli Reference Manual

Example
Enable NDP and NTDP function for Fast Ethernet port 5:
TL-SL5428E(config)#interface fastEthernet 1/0/5
TL-SL5428E(config-if)#cluster ndp enable ntdp enable

cluster ip pool

Description
The cluster ip pool command is used to create a new cluster. If no specified
cluster name is set through cluster commander command, the newly created
cluster will enjoy the system default name "tplink-cluster".
Syntax
cluster ip pool ip mask
Parameter
ip —— The cluster IP address pool.
mask —— The cluster IP address mask.
Command Mode
Global Configuration Mode
Example
Create a cluster and configure its IP address pool as 192.168.10.1 –
192.168.0.254:
TL-SL5428E(config)#cluster ip pool 192.168.10.1 255.255.255.0

cluster commander

Description
The cluster commander command is used to specify the cluster name, and
you can only specify the cluster name when you create the cluster. To delete a
cluster, please use no cluster commander command.
Syntax
cluster commander name
no cluster commander
Parameter
name —— The cluster name, ranging from 1 to 16 characters.
TL-SL5428E JetStream L2 Managed Switch CLI Guide
299