Clear Counters; Show Interface Status - TP-Link JetStream TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit jetstream l2 managed switch
Hide thumbs
Also See for JetStream TL-SL5428E:
- Reference manual (341 pages) ,
- User manual (307 pages) ,
- Cli reference manual (224 pages)
Table of Contents
Advertisement
no bandwidth { all | ingress | egress }
Parameter
ingress-rate ——Specify the bandwidth for receiving packets. Range: 1-100000
for the megaport, 1-1000000 for the gigaport.
egress-rate —— Specify the bandwidth for sending packets. Range:1-100000
for the megaport, 1- 1000000 for the gigaport.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Configure the ingress-rate as 5120Kbps and egress-rate as 1024Kbps for Fast
Ethernet port 5:
TL-SL5428E(config)#interface fastEthernet 1/0/5
TL-SL5428E(config-if)#bandwidth ingress 5120 egress 1024
clear counters
Description
The clear counters command is used to clear the statistic information of all the
Ethernet ports.
Syntax
clear counters
Command Mode
Global Configuration Mode
Example
Clear the statistic information of all Ethernet ports
TL-SL5428E(config)#clear counters
show interface status
Description
The show interface status command is used to display the connective-status
of an Ethernet port.
TL-SL5428E
JetStream L2 Managed Switch CLI Guide
162
Advertisement
Table of Contents
Need help?
Do you have a question about the JetStream TL-SL5428E and is the answer not in the manual?