TP-Link JetStream TL-SL5428E Cli Reference Manual page 27

 Login Mode
Firstly configure the Telnet login mode as "login", and both the connection password and the
Privileged EXEC Mode password as 123 in the prompted DOS screen shown in Figure 1-12.
Now, you can logon by Telnet in login mode:
1. Open Telnet, then type telnet 192.168.0.1 in the command prompt shown as Figure 1-13, and
press the Enter button.
TL-SL5428E
Figure 1-11 Enter into the Privileged EXEC Mode
Figure 1-12 Configure login mode
JetStream L2 Managed Switch CLI Guide
11