Ip Ssh Timeout; Ip Ssh Max-Client - TP-Link JetStream TL-SL5428E Cli Reference Manual

Example
Enable SSH v2:
TL-SL5428E(config)#ip ssh version v2

ip ssh timeout

Description
The ip ssh timeout command is used to specify the idle-timeout time of SSH.
To restore to the factory defaults, please use ip ssh timeout command.
Syntax
ip ssh timeout value
no ip ssh timeout
Parameter
value — — The Idle-timeout time. During this period, the system will
automatically release the connection if there is no operation from the client. It
ranges from 1 to 120 in seconds. By default, this value is 120.
Command Mode
Global Configuration Mode
Example
Specify the idle-timeout time of SSH as 100 seconds:
TL-SL5428E(config)#ip ssh timeout 100

ip ssh max-client

Description
The ip ssh max-client command is used to specify the maximum number of the
connections to the SSH server. To return to the default configuration, please use
no ip ssh max-client command.
Syntax
ip ssh max-client num
no ip ssh max-client
Parameter
num —— The maximum number of the connections to the SSH server. It
ranges from 1 to 5. By default, this value is 5.
TL-SL5428E JetStream L2 Managed Switch CLI Guide
118