Ipv6 Mld Snooping Vlan Immediate-Leave; Ipv6 Mld Snooping Vlan Mrouter - TP-Link JetStream TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit jetstream l2 managed switch
Hide thumbs
Also See for JetStream TL-SL5428E:
- Reference manual (341 pages) ,
- User manual (307 pages) ,
- Cli reference manual (245 pages)
Table of Contents
Advertisement
Example
Specify the member port aging time as 100 seconds in VLAN 2:
TL-SL5428E(config)# ipv6 mld snooping vlan 2 member-aging-time 100
ipv6 mld snooping vlan immediate-leave
Description
The ipv6 mld snooping vlan immediate-leave command is used to enable the
immediate leave function on a specified VLAN. To disable this funciton, please
use no ipv6 mld snooping vlan immediate-leave command. By default, it is
disabled.
Syntax
ipv6 mld snooping vlan vlan-id immediate-leave
no ipv6 mld snooping vlan vlan-id immediate-leave
Parameter
vlan-id —— The specified IEEE 802.1Q VLAN ID to enable the immediate leave
function, ranging from 1 to 4094.
Command Mode
Global Configuration Mode
Example
Enable immediate leave function on VLAN 2:
TL-SL5428E(config)# ipv6 mld snooping vlan 2 immediate-leave
ipv6 mld snooping vlan mrouter
Description
The ipv6 mld snooping vlan mrouter command is used to configure the static
router port in a specified VLAN. To disable the static router port, please use no
mld snooping vlan mrouter command.
Syntax
ipv6 mld snooping vlan vlan-id mrouter interface gigabitEthernet port
no ipv6 mld snooping vlan vlan-id mrouter [interface gigabitEthernet port]
Parameter
vlan-id ——The specified IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
port —— Interface number of the router port(s).
TL-SL5428E
JetStream L2 Managed Switch CLI Guide
255
Advertisement
Table of Contents
