Rmon Alarm - TP-Link JetStream TL-SL5428E Cli Reference Manual

type —— The event type, with "none", "log", "notify" and "both" options. "None"
indicates no processing, "log" indicates logging the event, "notify" indicates
sending trap messages to the management station, and "both" indicates logging
the event and sending trap messages to the management station.
owner-name — — The owner of the event entry, ranging from 1 to 16
characters. By default, it is "monitor".
Command Mode
Global Configuration Mode
Example
Configure the user name of entry 1, 2, 3 and 4 as user1, the description of the
event as "description1", the type of event as log and the owner of the event as
"owner1":
TL-SL5428E(config)#rmon event 1-4 user user1 description description1
type log owner owner1

rmon alarm

Description
The rmon alarm command is used to configure SNMP-RMON Alarm
Management. To return to the default configuration, please use no rmon alarm
command. Alarm Group is one of the commonly used RMON Groups. RMON
alarm management allows monitoring the specific alarm variables. When the
value of a monitored variable exceeds the threshold, an alarm event is
generated, which triggers the switch to act in the set way.
Syntax
rmon alarm index interface { fastEthernet port | gigabitEthernet port }
[ alarm-variable { drop | revbyte | revpkt | bpkt | mpkt | crc-lign | undersize |
oversize | fragment | jabber | collision | 64 | 65-127 | 128-511 | 512-1023 |
1024-10240 }] [ s-type { absolute | delta} ] [ rising-threshold r-hold ]
[ rising-event-index r-event] [ falling-threshold f-hold] [ falling-event-index
f-event] [ a-type {rise | fall | all} ] [ owner owner-name ] [ interval interval]
no rmon alarm index
Parameter
index —— The index number of the Alarm Management entry, ranging from 1
to 12, in the format of 1-3,5.
TL-SL5428E JetStream L2 Managed Switch CLI Guide
281