Show Mac Address-Table - TP-Link JetStream TL-SL5428E Cli Reference Manual

influence of the aging time and can only be deleted manually too. However, the
learned entries will be saved even the switch is rebooted.
status —— Enable or disable the Port Security function for a specified port. By
default, this function is disabled.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Enable Port Security function for Fast Ethernet port 1, select Static mode as the
learn mode, and specify the maximum number of MAC addresses that can be
learned on this port as 30:
TL-SL5428E(config)#interface fastEthernet 1/0/1
TL-SL5428E(config-if)#mac address-table max-mac-count max-number 30
mode static status enable

show mac address-table

Description
The show mac address-table command is used to display the information of all
address entries.
Syntax
show mac address-table {dynamic | static | drop | all }
Parameter
dynamic | static | drop | all —— The type of your desired entry.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of all address entries:
TL-SL5428E(config)#show mac address-table all
TL-SL5428E JetStream L2 Managed Switch CLI Guide
127