Password - TP-Link JetStream TL-SL5428E Cli Reference Manual

Enter the Virtual Terminal configuration mode so as to prepare further
configurations such as password and login mode for virtual terminal 0 to 5:
TL-SL5428E(config)#line vty 0 5

password

Description
The password command is used to configure the connection password. To
clear the password, please use no password command.
Syntax
password password [secret {simple | cipher} ]
no password
Parameter
password —— Configure the connection password, which contains 16
characters at most, composing digits, English letters and under dashes only.
simple | cipher —— The way of displaying password in configuration file. By
default, it is "cipher".
Command Mode
Line Configuration Mode
Example
Configure the connection password of Console port connection 0 as "tplink":
TL-SL5428E(config)#line console 0
TL-SL5428E(config-line)#password tplink
Configure the connection password of virtual terminal connection 0-5 as "tplink":
TL-SL5428E(config)#line vty 0 5
TL-SL5428E(config-line)#password tplink
TL-SL5428E JetStream L2 Managed Switch CLI Guide
70