Viewing The Output Status - Cisco D9854 Installation And Operation Manual

Viewing the Output Status

To View the Output Status
Proceed as follows to view the Output Status page:
From the user interface of the D9854, click the Status tab, and then click the Output
Status icon from the sub-page.
The Output Status page displays the following ASI and MPEGoIP Output Status
information:
ASI Output Status
Output Mode
Rate (Mbps)
Null Pkts
Null Rate (Mbps)
MPEGoIP Output
Output Mode
Rate (Mbps)
5-16 Model D9854 Advanced Program Receiver Installation and Operation Guide
The DPM output mode. For a description of each
output mode, see Output Mode, page 5-17.
The output rate (0 to 213 Mbps). It is only used if
Rate Control is set to User.
Displays whether to insert null packets in the output
stream (Yes or No).
The null packet rate, in Mbps.
Status
The DPM output mode. For a description of each
output mode, see Output Mode, page 5-17.
The output rate (0 to 999.99999 Mbps). It is only
used if Rate Control is set to User.
Description
Description
4021470 Rev D