Cisco D9854 Installation And Operation Manual page 102

Advanced program receiver
Table of Contents

Advertisement

Setup Menu: IP,
Continued
SNMP Read Community String
Description:
Parameters:
SNMP Write Community String
Description
Parameters:
Reset Telnet Logins
Description:
TRAP DESTINATIONS
Trap IP Address
Description:
Parameters:
4-40
Model D9854 Advanced Program Receiver Installation and Operation Guide
The SNMP Community Read field is used when communicating
with a device within an SNMP environment. These commands
allow you to set the password to read and write data to a device to
display diagnostics traps/alarms. The options are public (default)
and or a custom string.
Use the default community string called public or enter a custom
community string. To set a custom community string, enter an
alphanumeric character string up to 31-characters in length
identifying the password for the device. Note that the community
string is case-sensitive.
The SNMP Community Write field is used when communicating
with a device within an SNMP environment. These commands
allow you to set the password to read and write data to a device to
display diagnostics traps/alarms. The options are public (default)
and or a custom string.
Use the default community string called public or a custom
community string. To set a custom community string, enter an
alphanumeric character string up to 31-characters in length
identifying the password for the device. Note that the community
string is case-sensitive.
Resets the username and password for Telnet and HTTP logins to
its default values.
Note: To change your password, refer to Setting Admin User
Privileges via a Telnet Connection, page 3-16. If you need to
change your username, you must be an Admin user.
This sets the destination for SNMP trap messages for events (i.e.,
fault messages).
Up to 12 digits in length, e.g., 155.128.100.200.
4021470 Rev D

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents