Overview
D9854 Receiver Rear Connector Panel
The following diagrams show the rear connector panel so the two D9854 receiver
models available, Base and SDI with SD/HD-SDI and AES outputs.
Connectors
The following table describes the function and type of the various connectors.
Connector
RF Inputs
ASI Input
3-6
Model D9854 Advanced Program Receiver Installation and Operation Guide
Section B - Rear Connector Panel
SDI Model, with SD/HD-SDI and AES outputs
Each input accepts an LNB signal
input. RF1 provides LNB power for
use when no external LNB power
source is available. RF2 to R4 require
an external LNB power source.
Asynchronous Serial Interface Input. BNC
Base Model
Function
Connector Type
F
4021470 Rev D