Section C - Transport Stream Outputs; Asi Output; Mpegoip Output (Optional; Mpe Output - Cisco D9854 Installation And Operation Manual

Advanced program receiver
Table of Contents

Advertisement

Section C - Transport Stream Outputs

ASI Output

Number of outputs
Type of connector
Output impedance
Data amplitude
Return loss
Transport stream bit rate
ASI bit rate
Transport stream formats

MPEGoIP Output (optional)

Number of outputs
Type of connector
Output modes
IP Addressing
TS Streaming
TS Bit Rate

MPE Output

Number of outputs
Type of connector
Output modes
IP Addressing
TS Input
Bit Rate
4021470 Rev D
Model D9854 Advanced Program Receiver Installation and Operation Guide
Item
Item
Item
Specification
1
75 Ω BNC
75 Ω according to EN 50083-9
800 mV peak-peak ± 10% according to EN
50083-9
>17 dB, 27 to 270 MHz
1 to 120 Mbit/s ± 100 ppm
200 Mbit/s ± 100 ppm
According to EN 50083-9.
188 bytes structure,
204 bytes without Reed Solomon,
Burst or packet format.
Specification
1
RJ-45, 10/100/1000 BaseT
UDP RAW, RTP
Multicast
MPTS
1 to 120 Mbps
Specification
1
RJ-45, 10/100/1000 BaseT
IPv4 datagrams
Multicast, up to 5 addresses
up to 5 PIDs
up to 10 Mbps (for 1500 byte packets)
A-13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents