Cisco D9854 Installation And Operation Manual page 51

Connector
ASI Output
Management
HD-SDI Outputs
RS-232 Data
Cue Tone/Cue
Trigger Relay
Outputs
Composite Video
Outputs
Component Video
Outputs
AES-3id Audio
Outputs
Balanced Audio
Outputs
Ground
Power
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide
Function
One Asynchronous Serial Interface
Output.
For code downloading/application
upgrading for the D9854 receiver.
M1 and M2 provide HD serial digital
video with embedded audio output
for HD applications according to
SMPTE 292M.
RS-232 data output: 7 bits, even
parity, 1 stop bit, up to 38.4 kb/s.
These outputs are user-configurable
via the Setup menu on the front
panel.
Program relay provides
programmed responses for alarms,
cue trigger states for ad-insertion
equipment, or a cue tone output for
connection to ad-insertion
equipment.
CVBS 1 and CVBS 2 provide two
identical SD composite video
outputs for monitoring applications.
SD to HD upconverted component
video output for HD monitoring
applications.
AES-3id outputs. One output for
each stereo channel.
Audio 1 and Audio 2 provide two
stereo pairs or four mono channels.
Screw
AC power
Connector Type
BNC
RJ45
BNC
9-pin sub-D female
15-pin sub-D female
BNC
BNC
BNC
Terminal Blocks
Grounding point for
the receiver.
IEC 60320 Sheet 14
3-7