Cisco D9854 Installation And Operation Manual page 99

Setup Menu: TS Input,
STATUS
Services List Mode
Description:
Parameters:
Frequency Tuning
Description:
Parameters:
RE-ACQUIRE
Description:
Parameters:
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide
Continued
Indicates which tables are used to obtain tuning and channel lists.
This values on this menu only apply when Tune Mode is set to
Custom.
Degraded or Rigorous. Rigorous means all the default settings must
be present in the received signal. Degraded means only the table
parameters present in the received signal will be used to install the
receiver. The default is Rigorous Install.
The following table displays the default settings for the allowed
service lists and frequency tuning settings.
Allowed Service Lists
BAT
NIT
SDT
PAT
Frequency Tuning
Indicates whether the receiver is tuned to the received signal using
the NIT or a Preset.
NIT or Preset.
Re-acquires the signal using the tuning parameters from user
settings.
Abort or Continue. Select Abort to cancel the operation or choose
Continue to complete the operation.
Auto Basic Custom
N N N
Y Y N
Y N N
Y N Y
NIT NIT Preset
Fixed PID
N
N
N
N
Preset
4-37