Table of Contents
Advertisement
Chapter 5 Web GUI Setup and Monitoring
Choose the tables which will be passed, dropped, regenerated or passed with
rate control (PwRC) from the ASI Output. For more information on the table
options, see PSI Table Settings (on page 105).
The CDT is different from the other tables listed because the CDT is referred to
within the PMT, rather than outside the PMT. Check the Block CDT Output
check box to override the DPM PID map configuration for CDT PIDs and to
always drop all CDTs. Otherwise, clear the Block CDT Output to permit the
output of CDTs following the configured DPM PID map configuration and all
other DPM constraints.
9
From the PSI Regeneration Option drop-down list, choose whether to
regenerate the PSI tables to the output. Choose Always to regenerate all the
tables or choose As Needed to only regenerate the tables if the content has
changed.
10 Click OK.
11 Click Apply.
12 Click Copy To MOIP to copy all the DPM data from the ASI output to the MPEG
over IP output.
Viewing the ASI Output Transport Status
From the user interface of the D9859, choose Transport Stream > Output Transport
Status under ASI Output. The PID Output Status page is displayed.
194
OL-31980-01
Hide quick links:
Advertisement
Table of Contents
