Cisco D9854 Installation And Operation Manual page 264

Messages,
Continued
Warnings
The following table shows an alphabetical list of the available messages and their
default warning status.
Warning
ASI TS Overflow
MPoIP TS Overflow Set
6-16
Message Message
Type
Set ASI Output Overflow Cause: Uplink settings may
Clear ASI Output Overflow
Cleared
MPEGoIP Output
Overflow
Clear MPEGoIP Output
Overflow Cleared
Model D9854 Advanced Program Receiver Installation and Operation Guide
Cause/Remedy
have changed since setting
up the unit.
Remedy: Increase the
output rate, drop
unreferenced content in
DPM Options, and drop the
programs that are not
needed for downstream
devices. Contact your
(uplink) service provider to
verify the expected bit rate
settings.
Cause: Uplink settings may
have changed since setting
up the unit.
Remedy: Increase the
output rate, drop
unreferenced content in
DPM Options, and drop the
programs that are not
needed for downstream
devices. Contact your
(uplink) service provider to
verify the expected bit rate
settings.
Description
The output rate is
higher than level set
by the user.
The output rate is
higher than the level
set by the user.
4021470 Rev D