Status Menu: General - Cisco D9854 Installation And Operation Manual

Status Menu: General

GENERAL STATUS
Input
Description:
Status
Description:
Parameters:
Rate (Mbps)
Description:
Parameters:
Level (dBm)
Description:
Parameters:
PE
Description:
Parameters:
Mode
Description:
Auth
Description:
Parameters:
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide
Indicates the active input port receiving the signal.
Indicates the current signal lock status for the selected RF input.
Signal Lock - See table.
Status
Locked Indicates the receiver is locked to a carrier
with no valid content.
Lock+Sig Indicates the receiver is locked to a carrier
with valid content.
No Lock Indicates the receiver is not locked to a
carrier.
Indicates the bit rate of the received input signal.
in Mbps.
Indicates the signal level of the received signal.
in dBm.
Indicates the Program Entry number.
PE1 to PE16.
Indicates the type of CA used for the received signal, e.g., SA or
BISS.
Indicates whether the receiver is authorized to receive the signal.
Yes, No.
Description
4-15