Setup Menu: Ip - Cisco D9854 Installation And Operation Manual

Setup Menu: IP

Structure
To view the IP menu from the Main menu, press the RIGHT arrow key once and the
then the SELECT key to reach the Setup menu. Then press the RIGHT arrow key
twice and the SELECT key to view the IP menu.
The IP menu allows you to set the parameters for communicating with other
equipment via the Ethernet Data and Management ports for MPEGoIP and MPE
applications and upgrading application software.
For instructions on how to select and store settings, see About the Front Panel,
page 4-2.
The IP menu has the following structure:
Port ID Description
1 management
Port ID V4/V6 IP Address
1 IPv4
Port ID Gateway
1 192.168.131.254
Port ID MAC Address
1 3F:23:65:D2:41:AF
Port ID Multicast Forwarding
1 Forward None
SNMP Read Community String
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
SNMP Write Community String
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Reset Telnet Logins
IP
Port ID
Description:
Parameters:
Description
Description:
Parameters:
4-38 Model D9854 Advanced Program Receiver Installation and Operation Guide
Main:Setup:IP
IP Trap Destinations
i s
Mask i s
192.168.131.225 24
i s
i s
i s
i s
i s
i s
Displays the ID for the Ethernet port.
1 or 2. The default is 1.
Sets the description or name for the Ethernet port.
Up to 20 alphanumeric characters in length.
i s
Trap IP Address Ins Del 1/2
255.255.255.255
Trap Community String
i s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
4021470 Rev D
2/2
i s